FG4SS-1200G-90G-NG: Can an alternative solution be found?

FG4SS-1200G-90G-NG, the model before this model Hobner, is estimated to be more than 20 years old. By looking up the data on the Internet, it should be the version introduced in 2001.

As this encoder is good enough, a number of working conditions scenarios can be held for many years. It is only in the last two years that inquiries for alternative solutions have begun to come in.

There are a few things that this encoder must keep in mind when communicating:

First, the size of the shaft diameter, there are 11 and 14 points, only to take photos of the shape of you have no way to confirm the shaft diameter, this is very important. Because it is not like the new products, the model will be labeled shaft size, this is no way to verify.

Another thing is the way the plug links, to figure out the pins. The ideal way to do this would be to send the originals in to test the definition of each pin. Then the solution will be given. Of course, with this one we have already determined the way the wires come out and the pin definitions.

Although, we already do basic testing. If you come across a product that is not from the same era, it is safer to confirm.

FG4SS-1200G-90G-NG, if you come across this model of encoder not working and can't buy it. You can approach us to try alternatives to solve the application problem.

About some of the older models, as long as someone consults the alternative, we will take the time to send to the site, as far as possible to help as many people. The main old model of the product is not good to buy, the machine is still there, some customers are not good to better other products, only to "original".