Micro Encoder 24mm OD Incremental Encoder Customized Introduction

The 24mm OD encoder is part of theMiniature Encoder, or compact encoder. Due to the relatively small outer diameter, it is convenient for easy installation and use in a small space. We offer customized 24mm OD incremental encoders.

Encoders like Scanner, Kübler have 24mm OD encoders, we have done the same development, for 24mm OD incremental encoders can be customized to replace. Both solid shaft and blind hole encoders can be customized, with spindle sizes 4, 5 and 6 mm.

The above picture is the appearance of SCANCON encoder, this 24mm OD encoder series we have the corresponding products customized. With a pulse count of up to 16,384 P/R and a protection class of up to IP65, these encoders are especially suited to narrow space environments and reduce installation space.

Incremental encoders determine the angle and direction of rotation by counting the number and direction of signal pulses. The number of pulses is proportional to the angle of rotation, while the direction of the pulses indicates the direction of rotation (clockwise or counterclockwise). By counting and decoding the pulses, rotational motion can be accurately measured. Incremental encoders are commonly used in applications such as position feedback, speed control and position control. They offer the advantages of high resolution, fast response and relatively low cost for motion measurement and control tasks in a wide range of industrial and mechanical systems.

If you need this kind of 24mm incremental encoder, please feel free to contact us.